Description
2.638-792.0 Wet sandblasting kit for Kärcher pressure washer
This accessory is compatible with “K2 to K7” pressure washers. Ideal for removing rust, paint and stubborn dirt.
This pressure washer kit lets you carry out sandblasting / wet blasting (abrasive spraying) to remove rust, paint and stubborn dirt.
The Kärcher wet sandblasting kit turns a Kärcher home-range pressure washer (K2 to K7) into an effective blasting device. It draws in a fine abrasive (sand, grain size approx. 0,2-0,8 mm depending on the compatible product) and sprays it under pressure onto the surface being treated, combined with the high-pressure water jet. The result: intensive, targeted cleaning of heavily soiled, worn or corroded surfaces.
Advantages and key features
Greater cleaning power: by combining a high-pressure jet with abrasive spraying, this kit significantly increases cleaning effectiveness compared with a simple water jet.
Intensive treatment of difficult surfaces: perfect for stripping, removing old paint, rust or ingrained dirt.
Wide compatibility: designed to work with the Kärcher home range of pressure washers K2, K3, K4, K5, K6 and K7, making it a versatile accessory.
Compact and light: at only ~1,2 kg, easy to handle and fit.
- Excellent results : on metal, stone, brick or concrete surfaces.
Applications
Stone, concrete, hardwood, steel, brick surfaces
- Renovation or cleaning of outdoor items (walls, fences, slabs, metal tools…)
Stripping rusty gates and metal structures.
Removing old paint from stone, brick or concrete walls.
Intensive cleaning of very dirty surfaces before renovation.
Preparing surfaces before painting, staining or treatment.
Restoring heavily oxidised outdoor objects or furniture.
Tips for use and safety
Use the recommended blasting abrasive (fine abrasive, grain 0,2-0,8 mm) to avoid damaging the nozzle, hose or surface being treated.
Fit the accessory to a compatible pressure washer (K2 to K7). Check that the gun, lance, connector and pressure are suitable.
Wear personal protective equipment (PPE): safety goggles, gloves, dust mask, ear protection, because blasting throws out fine abrasive particles.
Keep a suitable distance between the surface and the nozzle to avoid damaging or gouging the surface.
Do not use on fragile or incompatible surfaces (e.g. decorative paint, very thin metal, sensitive surfaces) without a prior test.
After use, clean the accessory and the sand suction hose to prevent blockage or corrosion.
Contents and rental conditions
Included: wet sandblasting gun/nozzle with abrasive suction hose, safety goggles
Not included: pressure washer (rented separately) and blasting abrasive.
Recommended abrasive: fine-grain Kärcher blasting sand.
Recommended equipment: gloves, dust mask, ear protection.
Not to be used: on fragile or varnished surfaces without a prior test.
Cleaning after use: rinse the hose and nozzle to prevent any blockage.
Tips for use and safety
Always wear personal protective equipment (PPE).
Keep a sufficient distance to avoid damaging the surface.
Always test on a small area before starting a large stripping job.
Only use compatible, dry abrasives.
Purge and clean the kit after each use
For your safety
DALC provides on request (with the option: Yes) the protective equipment needed to use the machine: ear protection, high-visibility vest, etc..
This equipment must be worn throughout use to ensure safe work in line with the manufacturer’s recommendations. (Choice to be discussed according to needs)















Reviews
There are no reviews yet.