Stains, smells, dull colours: a vacuum cleaner is no longer enough. A spray extraction cleaner sprays water and detergent into the fibres, then immediately sucks up the loosened dirt. It is the method professionals use, and anyone can do it.

What you need

1. Prepare the room

Move light furniture out of the way and vacuum the whole area carefully: a spray extraction cleaner is not designed to pick up crumbs and hair. Test on an inconspicuous corner to check that the colour does not run.

2. Measure the detergent

Fill the tank with lukewarm water and add the detergent according to the dosage on the bottle. Too much product leaves a sticky residue that attracts dust: better a little less than too much.

3. Clean in strips

Work in strips of about a metre, slowly pulling the nozzle towards you while spraying. Then make a second pass without spraying, just to suck up the remaining water. On stubborn stains, leave the product to work for a few minutes before vacuuming.

4. Let it dry

Open the windows and avoid walking on the carpet for a few hours. Good extraction at the end of cleaning greatly reduces drying time. To protect a sofa or seats against stains, you can finish with a fabric protector.

Our tips

  • Empty and rinse the dirty water tank as soon as it is full: suction stays effective.
  • Do not get glued-down carpets or the parquet underneath too wet.
  • For an end-of-tenancy clean, allow about half a day for a three-room flat.
Need a spray extraction cleaner? See floor and carpet rentals →

Collection from our Lausanne warehouse or home delivery. Questions? Call us on 076 458 85 54.